Current Location : Home > news > Technical Maintenance > How to deal with high temperature of excavator?

How to deal with high temperature of excavator?

Time : 2023-05-29 16:08:07 Sources : dozer-parts.com Author :  2

If you want to avoid high temperature failure, need not everyday actually ran a garage, yourself at home can be properly handle, many activities can once and for all!


Operating excavators like dealing with people, usually don't love him, then he must let you have a headache; If regular care care about him, he will be sick less often to reduce your troubles.

13963047.jpg

Therefore, to solve the problem of high temperature, first of all to do maintenance. Ok check radiator: dirty to clean up as soon as possible, often clean the dust inside the nacelle to avoid too much heat, do frequently see instrument, ensure the normal operation; Often check the multi-way valve dust, even much more with clear water gun, the extra dust to make additional warming for hydraulic system. Small small branches and leaves of extra butter, nothing to clear up, effectively reduce the risk of natural fire. After all, hundreds of thousands of millions of equipment, don't ignore.


High temperature in summer break?


Friendship tips:

Summer temperature is high, the hydraulic oil temperature will be high, very high risk of blasting hose. If the hose joint extrusion have oil leakage phenomenon, and then measure the length, do one of them put it on standby. 60/120/150 cm hose prepared around 8, 90 degrees normally head and head straight to use more, so the basic made a head of long tube all straight a head of 90 degrees is best. Broken after their processing, fastest in tube for 5 minutes, difficult to get the most hours, than to buy to save a lot of time after the pipe burst.


Step 1

STEP1 ANTI-DARK CIRCLE GEL

1) find a radiator, some car air conditioning evaporator can also, size according to your own equipment selection;


2) find a fan, and not very good, can dismantle the equipment above a down for scrap.


Step2 Fantasy Vanity & confirmation code

Material ready, as shown in the above, the machine cover with auger drill 4 holes to the fixed evaporating box, with block below the bottom. The wind from the machine cover to suck, wiring when cool, dropping...


Step 3 - Choose A Payment

Received a warm wind will pipe mouth, like this, it is also used less than warm wind, kill two birds with one stone.


Step 4


If there is no advance about device, can add a preliminary decision. Taobao has, cheap and affordable.


Step 5


Will buy the hose connected to it, the effect should all know, dust were beforehand about left and filter is a little bit the dust.


Step 6


All right of inspection and maintenance, not to the time don't have to change the oil air filters is necessary, however, details see operating mode.


Excavator cooling action here first, follow these six steps, believe the effect will be very powerful.


Related Articles